< a href = "http://www.whhdpk.cn/oxingquan.html" target = "_blank" > O ring < / a > the installation of the rubber sealing ring (O)

    1. Requirements for installing O-rings (O-type rubber seals)

    Before installing the O-ring (O-rubber seal), check the following:

    1. Whether the leading Angle is processed according to the drawing or whether the sharp edge is chamfered or rounded; 2. Whether the inner diameter is removed from the burr surface has no pollution;

    3. Whether the seals and parts have been coated with grease or lubricating fluid (to ensure the medium compatibility of the elastomer, it is recommended to lubricate the sealed liquid); 4. Do not use grease containing solid additives, such as molybdenum disulfide and zinc sulfide.

    Second, the manual installation < a href = "http://www.whhdpk.cn/oxingquan.html" target = "_blank" > O ring < / a > rubber sealing ring (O) :

    1. Use tools without sharp edges;

    2. Ensure that the < a href = "http://www.whhdpk.cn/oxingquan.html" target = "_blank" > O ring < / a > rubber sealing ring (O) does not distort, shall not be excessive tensile o-ring rubber sealing ring (O);

    3. Try to use auxiliary tools to install the O-ring (O-type rubber seal ring), and ensure correct positioning;

    4. For O-rings (O-rubber seals) bonded with sealing strips, do not stretch at the joint.

    Third, install screws, splines, etc

    1. When the O-ring (O-type rubber seal ring) is stretched, it must be used when it is passed through screws, splines, keyways, etc. The mandrel may be made of soft, smooth metal or plastic without burrs or sharp edges.

    2. When installing the compression screws, tighten the screws symmetrically, not in order of direction.

To order or request more information, please call 86+027-88779150 or submit http://www.whhdpk.cn/xunjiaxinxi.html" target = "_blank" > product ZiXunBiao < / a >.